Dent Tool Kit Paintless

Dent Tool Kit (Paintless)

What's Included:
1 pc Australian plug glue gun (High quality -40W)
1 pc glue side hammer (Material: High quality stainless steel)
1 pc dent lifter (Baby face mini lifter or normal mini lifter)
1 pc glue remover
1 pc scraper
8 pcs Black glue stick(11*200mm)
19 pcs glue tab
1 pc blow case

Note:
1) Use adjustable lifting-mode movable tripod puller and adjust it against size of the dent.
2) During operation , you need to adjust your force gradually until the position where the dent is located is pulled to the flat and recovered entirely.
3) The Dent Lifter squeeze trigger will allow you to control and massage door dings and hail damage until the desired results are achieved.
4) New material and new design, stronger material.
5) It is effective for the vehicle’s paint has not been broken or cracked.

How to use PDR Paintless dent repair kits?
1. Clean the dent with a clean wet cloth (you can use the yellow line board to confirm the dent)
2. Mount the glue stick into the glue gun, pull the trigger to let the glue stick enter into the glue gun, connect the power source and preheat for 5 minutes
3. Use a proper drawing gasket. Large dent requires a large drawing gasket.
4. Pull the trigger and apply the drawing gasket with extruded glue
5. Fast place the drawing gasket with hot melt glue at the centre of dent, press lightly until the glue cures and adheres (Let the glue cool for about 8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter)
6. Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent
7. Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen
8. Clean the repaired place with a clean wet cloth
Happy bidding and please check our other listings!